If your dad has a great sense of humor, this gift is perfect for Father’s Day. It’s an easy DIY project to make with your Cricut or Silhouette.

This post contains affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)!  Read my full disclosure policy.

HERE’S WHAT YOU NEED

HERE’S WHAT YOU DO

Start by measuring your wood sign to determine what size you’ll make the design.  Import the design into your cutting software and size accordingly.  Add a rectangle around the design to create a stencil.

Do you need more help with creating a vinyl stencil?  Check out these posts.

How to Make a Vinyl in Cricut Design Space.
How to Make a Vinyl Stencil in Silhouette Studio

Cut out the design and weed away the excess vinyl.

Cut a piece of transfer tape just a little large than your design.  Place it over the vinyl and rub over the design with an application tool to help the vinyl stick to the transfer tape.

Remove the vinyl backing.  I like to flip over the design and pull the backing away from the vinyl.  This way, the vinyl doesn’t get bent or creased.

Place the vinyl stencil on the sign.  Match up the straight edge of the stencil with the straight edges of the sign. Rub over the vinyl with the application tool.

Carefully remove the transfer tape.

I like to put on a light layer of Mod Podge before I paint.  This helps to fill in any gaps between the stencil and the clipboard and will help create nice crisp lines with the paint.

After the Mod Podge dries, start filling in the design with light layers of paint.

Once the paint is dry to the touch, you can pull off the stencil.

I like to use a weeding tool to pull up the small pieces between the letters.

What a great gift for dad!  If you like to make funny signs, this one I made for Mother’s Day would work great for dads, too!

Did you enjoy this post? Help spread the word!  Share this post on your favorite Pinterest board.  Thanks!

Want to make your own? Get the free cut file for this project in the resource library

 

 

Share this post:

Leave a Reply

Your email address will not be published.